Add protection, handheld mounting options, and additional accessory mounting to your Sony a7S III mirrorless camera with this black Tiltaing Pro Kit from Tilta. The kit includes a formfitting full camera cage, a quick release top handle, an HDMI cable clamp, an HDMI adapter cable, Manfrotto and Arca-type quick release plates, a left-side advanced power handle with run/stop control, a run/stop cable, a handle mounting attachment, a 15mm LWS baseplate, and two 15mm rods.
The formfitting aluminum cage protects your camera while leaving open access to all ports and slots, and it features multiple 1/4"-20 and 3/8"-16 accessory threads, an ARRI-style rosette, a 15mm rod port, and two shoe mounts. The camera mounts onto the 15mm baseplate and the 7.9" long rods insert into the baseplate to add more accessory options. The top and side handles provide a variety of handheld options and additional accessory mounting, while the side handle also provides run/stop control and L-series battery power for the camera. The included Manfrotto and Arca-type quick release plates allow you to mount your kit onto a variety of tripods and rigs.
Tilta Full Camera Cage for Sony a7S III (Black)
In a robust four-sided design fashioned in black, the Tilta Full Camera Cage for Sony a7S III provides two shoe mounts, a 15mm rod port, and an ARRI-standard rosette with an M6 thread for attaching optional handgrips. The rod port, which is built into the cage, is secured tightly with an integrated screw on the rear side of the port, using an included Allen key. The cage also offers 1/4"-20 and 3/8"-16 mounting threads for accessories, and there are multiple 1/4"-20 threads on the bottom of the cage that allow you to find the optimal balance for your camera when mounting on tripods, gimbals, and other supports.
Tilta Quick Release Top Handle (Black)
This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle's features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4"-20 and 3/8"-16 threads with and without anti-twist divots.
The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4"-20 threaded mounting hole with anti-twist divots. Multiple 1/4"-20 and 3/8"-16 threaded mounting holes are machined into the top and sides of the handle.
Tilta HDMI Cable Clamp Attachment for Sony a7S III Full Cage (Black)
The HDMI Cable Clamp Attachment for Sony a7S III Full Cage from Tilta attaches to the side of the cage with a single screw and a locking pin to clamp your HDMI cable connector and prevent it from accidental disconnection. This version of the clamp is designed in black to best match the black version cage. After securing the clamp to the cage, you can use the included Allen key to tighten it around the cable connector by tightening the integrated screw at the top of the clamp. The integrated screw is ridged, so you can tighten it with your fingers as well, although not as tight.
Tilta Manfrotto Quick Release Plate for Sony a7S III Cages (Black)
Using two included screws, the compact Manfrotto Quick Release Plate, in black, attaches to the bottom of Tilta full and half camera cages for the Sony a7S III. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Manfrotto camera plates.
Tilta Arca-Swiss Quick Release Plate for Sony a7S III Cages (Black)
Using two included screws, the compact Arca-Swiss Quick Release Plate, in black, attaches to the bottom of Tilta full and half camera cages for the Sony a7S III. The cage can then be mounted directly on tripod heads, ball heads, and other supports that accept Arca-Swiss camera plates.
Tiltaing Advanced Left-Side Handle Adapter Type VI (Black)
The Advanced Left-Side Handle Adapter Type VI from Tilta enables you to mount a Tiltaing Left-Side Wooden Handle to the NATO rail mount on select Tilting camera cages. This black Type VI adapter is constructed of aluminum and stainless steel and comes with an Allen key.
Compatibility
NATO Rail Mount
Locking NATO rail mount
tiltaing 15mm LWS Baseplate Type II (Black)
This black Tiltaing 15mm LWS Baseplate Type II from Tilta features two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Panasonic GH5 series, Fuji XT3/4, Nikon Z6/Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4"-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair of LWS 15mm rod clamps with spring-loaded locking levers.
Compatibility
Tiltaing half and full camera cages for:
This Tilta Single 15mm Aluminum Rod is 7.87" in length and anodized black. It is compatible with 15mm LWS and studio rod support clamps and chamfered to make it easier to slide rod-mounted accessories onto the end.
Tilta HDMI Extension Cable for Tiltaing Camera Cages
This HDMI Extension Cable from Tilta is primarily designed to connect to your camera inside your Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. Simply plug the male HDMI end into the camera, and connect your display's HDMI cable to the female port of this extension cable. It is also compatible with Tilta's HDMI cable clamps for security.
Tiltaing Advanced Side Handle Run/Stop Cable for Sony a6/a7/a9 Series Cameras
The Tiltaing Run/Stop Cable from Tilta connects the Tiltaing Advanced Side Handle to your Sony a6, a7, or a9 series camera, enabling run/stop triggering with the push of a button.
Compatibility
| Material | Aluminum, Steel |
|---|---|
| Weight | 6.08 oz / 172 g |
Please Login to Add Review
| GTIN | - |
|---|