product_outofstock NANLITE NANLITE RC-1 REMOTE CONTROL

NANLITE NANLITE RC-1 REMOTE CONTROL

1495/-
The RC-1 Bi-Color Remote Controller from NanLite is a multi-function wireless control accessory that is especially valuable for adjusting lights that are positioned at a distance or hung overhead. The remote can adjust color tempe...
product_outofstock NANLITE PAVOTUBE 15C 2KIT

NANLITE PAVOTUBE 15C 2KIT

37895/-
With a 1.9" diameter and a T12 form factor, the PavoTube 15C 2' RGBW LED Tube with Internal Battery 2 Light Kit from NanLite is ideal for hiding unobtrusively in small areas on a set or for shooting in vehicles such as ca...
product_outofstock NANLITE MIXWAND 18II RGBWW

NANLITE MIXWAND 18II RGBWW

13995/-
Designed with full color control for creative lighting, the MixWand 18 RGB Hard and Soft LED Light Painting Wand from NanLite is ideal for obtaining exciting effects, while its form factor makes it just plain fun to use. The Wand ...
product_outofstock NANLITE PAVOTUBE QUAD BANK T12 LED TUBE GOOSENECK MOUNT WITH 5/8" RECEIVER

NANLITE PAVOTUBE QUAD BANK T12 LED TUBE GOOSENECK MOUNT WITH 5/8" RECEIVER

5106/- 5800/-
The PavoTube Quad Bank Gooseneck Mount by Nanlite is a simple and effective grip solution for mounting PavoTube 15C or 30C LED tube lights on a single light stand via a standard 5/8" receiver. Featuring a gooseneck extension ...

Out of stock

product_outofstock NANLITE PAVOTUBE DOUBLE BANK T12 LED TUBE GOOSENECK MOUNT WITH 5/8" RECEIVER

NANLITE PAVOTUBE DOUBLE BANK T12 LED TUBE GOOSENECK MOUNT WITH 5/8" RECEIVER

4313/- 4900/-
The PavoTube Double Bank Gooseneck Mount by Nanlite is a simple and effective grip solution for mounting PavoTube 15C or 30C LED tube lights on a single light stand via a standard 5/8" receiver. Featuring a gooseneck extensio...

Out of stock

product_outofstock NANLITE PAVOTUBE T12 TRANSPARENT CLIP FOR 4 TUBES WITH PIN

NANLITE PAVOTUBE T12 TRANSPARENT CLIP FOR 4 TUBES WITH PIN

2905/- 3300/-
A secure and transparent mounting option for holding up to 4 Pavotubes that terminates in a 5/8in baby pin compatible with all standard grip heads. Compatible light: PavoTube Series.

Out of stock

product_outofstock NANLITE PAVOTUBE T12 TRANSPARENT CLIP FOR 2 TUBES

NANLITE PAVOTUBE T12 TRANSPARENT CLIP FOR 2 TUBES

1673/- 1900/-
A secure and transparent mounting option for holding up to 2  Pavotubes that terminates in a 5/8in baby pin compatible with all  standard grip heads.  Compatible light: PavoTube Series

Out of stock

product_outofstock NANLITE PAVOTUBE HOLDER WITH SWIVEL BALL JOINT AND 5/8" BABY PIN

NANLITE PAVOTUBE HOLDER WITH SWIVEL BALL JOINT AND 5/8" BABY PIN

4313/- 4900/-
The Pavotube Tube Holder with Swivel Ball Joint and 5/8" Baby Pin by Nanlite is designed to hold a single Pavotube 15C or 30C LED tube light in any position, wherever you need it. The PavoTube Holder holder features a swivel ...

Out of stock

product_outofstock NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP WITH 5/8" BABY PIN

NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP WITH 5/8" BABY PIN

617/- 700/-
The NanLite Pavotube Transparent Polycarbonate T12 LED Tube Mounting Clip with 5/8in Baby Pin is a secure and transparent mounting option for Pavotube 15C or 30C LED Tubes that terminates in a 5/8in baby pin compatible with all standard grip heads. P...

Out of stock

product_outofstock NANLITE PAVOTUBE SINGLE T12 LED TUBE HOLDER WITH 5/8" RECEIVER

NANLITE PAVOTUBE SINGLE T12 LED TUBE HOLDER WITH 5/8" RECEIVER

1497/- 1700/-
Mount your Pavotube 15C or 30C to light stands and C-stands with the Pavotube Single T12 LED Tube Holder from Nanlite. This tube mount holder features two rubber-coated T12 clips to hold the Pavotube 15C or 30C, and the mount terminate...

Out of stock

product_outofstock NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP WITH TWO 1/4"-20 RECEIVERS

NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP WITH TWO 1/4"-20 RECEIVERS

265/- 300/-
Virtually invisible, the Transparent Polycarbonate Clip with Two 1/4"-20 Receivers from NanLite is a versatile mounting clip featuring two 1/4"20 receivers compatible with most tripod heads. It's for use with PavoTub...

Out of stock

product_outofstock NANLITE PAVOTUBE 3.5MM SYNC CABLE

NANLITE PAVOTUBE 3.5MM SYNC CABLE

265/- 300/-
The PavoTube 3.5mm Sync Cable from NanLite allows multiple PavoTube LED strip lights to be connected and controlled together. This coiled cable expands from 15.7 to 31.5 inches.

Out of stock

product_outofstock NANLITE MINI TRIPOD AND HANDLE FOR PAVOTUBE II 6 C

NANLITE MINI TRIPOD AND HANDLE FOR PAVOTUBE II 6 C

529/- 600/-
The Mini Tripod and Handle for PavoTube II 6 C from NanLite is a low-profile support with a 1/4"-20 mounting screw designed to support the 10" LED fixture.

Out of stock

product_outofstock NANLITE WATERPROOF BAG FOR PAVOTUBE II 6C LED LIGHT

NANLITE WATERPROOF BAG FOR PAVOTUBE II 6C LED LIGHT

617/- 700/-
Keep your shoot going even if the weather takes a turn or light your underwater shot properly with the Nanlite Waterproof Bag for their Pavotube II 6C LED light. Made of durable clear TPU (thermoplastic polyurethane), the light fits into th...

Out of stock

product_outofstock NANLITE PAVOTUBE II 6C COUPLER

NANLITE PAVOTUBE II 6C COUPLER

353/- 400/-
The Nanlite Pavotube II 6C Coupler has 1/4"-20 male threads at each end to connect multiple Pavotubes together for increased brightness.

Out of stock

product_outofstock NANLITE MINI BALL HEAD WITH HOT SHOE ADAPTER AND 1/4''-20 MOUNT

NANLITE MINI BALL HEAD WITH HOT SHOE ADAPTER AND 1/4''-20 MOUNT

353/- 400/-
The Nanlite Mini Ball Head with Hot Shoe Adapter securely slides into your camera's hot shoe and also offers a female 1/4"-20 receiver for stand mounting. At the top is a single action locking ball head with a 1/4"-20 male thr...

Out of stock

product_outofstock NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP AND MINI BALL HEAD WITH HOT SHOE ADAPTER

NANLITE PAVOTUBE TRANSPARENT POLYCARBONATE CLIP AND MINI BALL HEAD WITH HOT SHOE ADAPTER

529/- 600/-
The Nanlite PavoTube Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4"-20 Mount is an adjustable, transparent mount for a Pavotube II 6C. You can attach it to a camera hot shoe, a light stand, or an acces...

Out of stock

product_outofstock NANLITE PAVOTUBE II 6C NP-F BATTERY GRIP WITH USB-C CABLE

NANLITE PAVOTUBE II 6C NP-F BATTERY GRIP WITH USB-C CABLE

1233/- 1400/-
Designed to power a Nanlite tube light, the PavoTube II 6C NP-F Battery Grip with USB-C Cable provides an ergonomic handle and a battery bay for an NP-F550 battery that will give the tube a run time of 70 minutes. It also features...

Out of stock

product_outofstock NANLITE PAVOTUBE II 6C FABRIC GRID

NANLITE PAVOTUBE II 6C FABRIC GRID

617/- 700/-
The Pavotube II 6C Fabric Grid from Nanlite attaches to the 10" tube light via straps and narrows the tube's 360° beam spread to 40° while eliminating spill light. Great for tight spaces and discreet illumination,...

Out of stock

product_outofstock NANLITE FABRIC BARNDOORS AND GRID FOR PAVOTUBE 15C

NANLITE FABRIC BARNDOORS AND GRID FOR PAVOTUBE 15C

4137/- 4700/-
Measuring approximately 2' in length and made of lightweight ripstop nylon, the 2-way Fabric Barndoors and Grid for PavoTube 15C from Nanlite attach to the LED tube and allow you to narrow and shape the wide 180-degree beam sp...

Out of stock

product_outofstock NANLITE FABRIC BARNDOORS AND GRID FOR PAVOTUBE 30C

NANLITE FABRIC BARNDOORS AND GRID FOR PAVOTUBE 30C

5017/- 5700/-
Measuring approximately 4' in length and made of lightweight ripstop nylon, the 2-way Fabric Barndoors and Grid for PavoTube 30C from Nanlite attach to the LED tube and allow you to narrow and shape the wide 180-degree beam sp...

Out of stock

product_outofstock NANLITE POWER ADAPTER FOR PAVOTUBE 30C

NANLITE POWER ADAPTER FOR PAVOTUBE 30C

2905/- 3300/-
The Power Adapter for Pavotube 30C from Nanlite is designed to run the fixture on 100 to 240 VAC, 50/60 Hz power.

Out of stock

product_outofstock NANLITE POWER ADAPTER FOR PAVOTUBE 15C

NANLITE POWER ADAPTER FOR PAVOTUBE 15C

1937/- 2200/-
The Power Adapter for Pavotube 15C from Nanlite is designed to run the fixture on 100 to 240 VAC, 50/60 Hz power.

Out of stock

product_outofstock NANLITE FORZA 60 LANTERN SOFTBOX (18")

NANLITE FORZA 60 LANTERN SOFTBOX (18")

5013/- 5695/-
Made to omni-directionally flood an area of the set with light, the 18" Forza 60 Lantern Softbox from NanLite is especially handy when your subject is subtly lit but you'd like the background to read as well. Often used o...

Out of stock

product_outofstock NANLITE LANTERN SOFTBOX LT-80 (31")

NANLITE LANTERN SOFTBOX LT-80 (31")

8534/- 9695/-
Ideal for hanging overhead on a boom, the 31" Lantern Softbox from NanLite is a near omni-directional light source that spreads light over a 270° area to increase ambient light or to provide the type of overhead lighting ...

Out of stock

product_outofstock NANLITE LANTERN SOFTBOX LT-120 (47")

NANLITE LANTERN SOFTBOX LT-120 (47")

14959/- 16995/-
Ideal for hanging overhead on a boom, the 47" Lantern Softbox from NanLite is a near omni-directional light source that spreads light over a 270° area to increase ambient light or to provide the type of overhead lighting ...

Out of stock

product_outofstock NANLITE FORZA 500

NANLITE FORZA 500

127995/-
Adopting a popular, easy-to-use form factor, the Forza 500 LED Monolight from NanLite has a daylight color temperature of 5600K with a high CRI/TLCI of 98/95, indicating accuracy in color rendition. The 12 x 8 x 5.6" fixture ...

Out of stock

product_outofstock NANLITE FORZA 60 KIT OF 2 WITH HARDSHELL CASE

NANLITE FORZA 60 KIT OF 2 WITH HARDSHELL CASE

59990/- 65295/-
Adopting a popular, easy-to-use form factor, the Forza 60 LED Monolight from NanLite has a daylight color temperature of 5600K with a high CRI/TLCI of 98/95 indicating advanced accuracy in color rendition. the 7.6 x 4.1 x 3.2"...

Out of stock

product_outofstock NANLITE FORZA 500 KIT OF 2

NANLITE FORZA 500 KIT OF 2

227990/- 252995/-
Adopting a popular, easy-to-use form factor, the Forza 500 LED 2-Monolight Kit from NanLite has a daylight color temperature of 5600K with a high CRI/TLCI of 98/95, indicating accuracy in color rendition. The kit includes two Forz...

Out of stock

product_outofstock NANLITE FS-150 LED DAYLIGHT SPOT LIGHT

NANLITE FS-150 LED DAYLIGHT SPOT LIGHT

25995/-
Adopting a familiar, intuitive form factor, the Nanlite FS-150 AC LED Monolight is a powerful fixture that employs COB LEDs with a color temperature of 5600K (for shooting in daylight-dominated environments) while its high CRI/TLCI rating o...

Out of stock

product_outofstock NANLITE FS-200 LED DAYLIGHT SPOT LIGHT

NANLITE FS-200 LED DAYLIGHT SPOT LIGHT

25995/-
Adopting a popular, easy-to-use form factor, the Forza 200 LED Monolight from NanLite has a daylight color temperature of 5600K with a high CRI/TLCI of 98/95 indicating advanced accuracy in color rendition. The 12.2 x 8.3 x 4.5&qu...

Out of stock

product_outofstock NANLITE FS-300 LED DAYLIGHT SPOT LIGHT

NANLITE FS-300 LED DAYLIGHT SPOT LIGHT

32995/-
Adopting a popular, easy-to-use form factor, the Forza 300 LED Monolight from NanLite has a daylight color temperature of 5600K with a high CRI/TLCI of 98/95, indicating accuracy in color rendition. The 12 x 8 x 5.6" fixture ...

Out of stock

product_outofstock NANLITE RF-FZ60 FORZA 60 REFLECTOR

NANLITE RF-FZ60 FORZA 60 REFLECTOR

1095/-
The 55-Degree Reflector for Forza 60 from Nanlite is an all-purpose modifier that directs the light output from this flash head. The reflector has a proprietary bayonet mount.

Out of stock

product_outofstock NANLITE RF-BM BOWENS MOUNT REFLECTOR

NANLITE RF-BM BOWENS MOUNT REFLECTOR

1695/-
The 55-Degree Reflector for Forza 300 and 500 from Nanlite is an all-purpose modifier that directs the light output from these flash heads. The reflector has the widely-used Bowens S-type mount....

Out of stock

product_outofstock NANLITE BOWENS MOUNT ADAPTER FOR FORZA 60 AS-BA-FZ60

NANLITE BOWENS MOUNT ADAPTER FOR FORZA 60 AS-BA-FZ60

1695/-
The Forza 60 Bowens Mount Adapter from Nanlite expands the light shaper compatibility of the Forza 60 LED light head to include most Bowens S-mount-style softboxes, reflectors, and beauty dishes, plus shaft-mounted accessories lik...

Out of stock

product_outofstock NANLITE BH-FZ60 BATTERY HOLDER FOR FORZA 60

NANLITE BH-FZ60 BATTERY HOLDER FOR FORZA 60

3195/-
For image-makers in the field without access to AC power, the Forza 60 Battery Grip from Nanlite is an ergonomic solution that is designed to balance the light even with the optional FL-11 Fresnel or a softbox attached. The grip a...

Out of stock

product_outofstock NANLITE BH-FZ60-V V-MOUNT BATTERY HOLDER FOR FORZA 60

NANLITE BH-FZ60-V V-MOUNT BATTERY HOLDER FOR FORZA 60

4195/-
The V-Mount Battery Grip for Forza 60/60B from NanLite offers a powered ergonomic handle for the Forza lights that can be handheld or stand mounted. The grip has a built-in V-mount for separately purchased batteries that will give...

Out of stock

product_outofstock NANLITE FL-11 FRESNEL LENS FOR FORZA 60 (WITH BARNDOOR)

NANLITE FL-11 FRESNEL LENS FOR FORZA 60 (WITH BARNDOOR)

6995/-
The FL-11 Fresnel Lens for Forza 60 from NanLite modifies the light's wide beam spread to an adjustable 10 to 45-degree flood-to-spot beam angle. Benefitting from NanLite's Quick Change Modifier Mount, the Fresnel lens off...

Out of stock

product_outofstock NANLITE FL-20 FRESNEL LENS FOR FORZA 300 (WITH BARNDOOR)

NANLITE FL-20 FRESNEL LENS FOR FORZA 300 (WITH BARNDOOR)

10495/-
Employing the widely-compatible Bowens S-Type mount, the glass Fresnel Lens for Forza 300 and 500 from NanLite modifies the Forza's wide beam spread to a focusable spot (10°) to flood (45°) coverage. The lens includes ...

Out of stock

product_outofstock NANLITE PROJECTION ATTACHMENT MOUNT FOR FORZA 60 WITH19°LENS - PJ-FZ60-19

NANLITE PROJECTION ATTACHMENT MOUNT FOR FORZA 60 WITH19°LENS - PJ-FZ60-19

22595/-
The Projector Mount for Forza 60 and 60B LED Monolights from Nanlite is an ideal accessory for controlling the Forza's output for theatrical effects, hair lighting, and selective lighting of your subject, via its non-curved le...

Out of stock

product_outofstock NANLITE PROJECTION ATTACHMENT MOUNT FOR FORZA 60 WITH 36°LENS - PJ-FZ60-36

NANLITE PROJECTION ATTACHMENT MOUNT FOR FORZA 60 WITH 36°LENS - PJ-FZ60-36

22595/-
Nanlite – PJ-FZ60-36 Projector Mount for Forza 60/60B LED 36° The Projector Mount for Forza 60 and 60B LED Monolights from Nanlite is an ideal accessory for controlling the Forza’s output for theatrical effects,...

Out of stock

product_outofstock NANLITE IRIS DIAPHRAGM FOR FORZA 60/60B PROJECTION ATTACHMENT - PJ-FZ60-AI

NANLITE IRIS DIAPHRAGM FOR FORZA 60/60B PROJECTION ATTACHMENT - PJ-FZ60-AI

4995/-
Designed to provide the most control possible from the Forza projector, the Iris for Forza 60 and 60B LED Monolight Projector from Nanlite is an 18-bladed accessory that slips into the projector and allows the user to shape its ou...

Out of stock

Reliable Photo Stores