Pairing the HD-5000 Video Camera Stabilizer with an Arm Brace, this FLYCAM bundle provides a mechanical stabilization solution that distributes all the weight across your forearm, reducing arm stress and fatigue. The cushioned design of the arm brace further adds to the ease of handling of the stabilizer. The HD-5000 supports up to 11 lb loads and allows for stabilized pan, tilt, and roll motion as you move around in different directions. Included with the stabilizer is a Unico sliding camera platform with a drop-in quick release plate. You can balance your camera with the supplied 16 counterweight plates plus via the sliding camera platform for a more efficient workflow. The included table clamp provides a mounting point for balancing the stabilizer as well as setting it down when not in use.
FLYCAM HD-5000 Video Stabilizer with Quick Release Plate and Table Clamp
Capture smooth, steady footage with a variety of cameras up to 11 lb with the HD-5000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 3 lb.
The HD-5000 stabilizer has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 21 to 29" telescoping center post for balancing camera rigs up to 11 lb. The included quick release plate installs on the top plate and has 1/4"-20 and 3/8"-16 screws to mount a variety of cameras.
Also included are sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.
Aluminum camera stabilizer with 11 lb load capacity
X- and Y-axis adjustments on camera platform
Sixteen counterweights that stack onto the 11.5 to 17.2" adjustable baseplate for balancing
Telescoping two-section center post from 21 to 25"
Quick release camera plate with 1/4"-20 and 3/8"-16 camera mounting screws
Table clamp for balancing your camera on the gimbal and storing when not in use
FLYCAM Arm Brace Support for Select Mechanical Stabilizers
The FLYCAM Arm Brace Support wraps around the arm, securing by hook-and-loop fasteners, and provides a metal post for mounting select mechanical stabilizers. It supports the FLYCAM 3000, 5000, and Nano, as well as many 3rd-party models. Providing cushion comfort while distributing the weight of the stabilizer over your forearm, it reduces arm stress and fatigue and allows for easier and more controlled handling of the stabilizer.
The metal post on the end measures 0.72" in diameter on top and 0.85" on the bottom. The control handle of the stabilizer mounts directly on top of this post. Any handle that meets these diameter measurements is compatible. With your hand over the stabilizer handle, you can then operate the stabilizer with better stability. The handle doesn't need to be secured in any way but rather just slides on from the top. The arm brace can be worn over the left or right arm and fits virtually all arm sizes.
|Weight||3.09 lb / 1.4 kg|