For increased stabilization and easier operation with the HD-3000, this FLYCAM bundle combines the HD-3000 Video Camera Stabilizer with a Comfort Arm & Vest that distributes all the weight to your torso and hips. In addition to the weight distribution, the tension-adjustable extension arm further enhances the HD-3000 with shock-absorbing stability. The vest is designed to fit men and women and is adjustable between 28 and 60" waist sizes.
The HD-3000 supports up to 8 lb loads and allows for stabilized pan, tilt, and roll motion as you move around in different directions. Included with the stabilizer is a Unico quick release sliding camera platform with a drop-in quick release plate. You can balance your camera with the supplied 16 counterweight plates plus via the sliding camera platform for a more efficient workflow. The included table clamp provides a mounting point for balancing the gimbal as well as setting it down when not in use.
FLYCAM HD-3000 Video Camera Stabilizer with Quick Release Plate and Table Clamp
Capture smooth, steady footage with a variety of cameras up to 8 lb with the HD-3000 Video Stabilizer from FLYCAM. Featuring a three-axis gimbal and foam handgrip, this stabilizer makes it easy to capture professional-looking handheld footage, and it can easily be used for panning, tilting, booming, or running. The stabilizer is made of lightweight aluminum and weighs only 2.6 lb.
The HD-3000 has a dynamic camera balance platform that allows balancing the camera on its X and Y axes, and it features a toolless 15.7 to 23.6" telescoping center post for balancing camera rigs up to 8 lb. The included quick release plate installs on the top plate and has 1/4"-20 and 3/8"-16 screws to mount a variety of cameras.
It comes with sixteen counterweights that stack onto the adjustable base to ensure a perfect balance. A table clamp provides a mounting point for the gimbal for balancing and for storing the balanced, assembled gimbal when not in use.
Aluminum camera stabilizer with 8 lb load capacity
X- and Y-axis adjustments on camera platform
Sixteen 3.2 oz counterweights for balancing on the 9.5 to 14.5" adjustable base platform
Telescoping two-section center post from 15.7 to 23.6"
Quick release camera plate with 1/4"-20 and 3/8"-16 camera mounting screws
Table clamp for balancing your gimbal and to store when not in use
FLYCAM Comfort Arm Vest Support for Camera Stabilizers
The FLYCAM Comfort Arm Vest Support for Camera Stabilizers is a body-mounted camera-stabilization system that lets you walk, run, climb stairs, and much more with loads up to 11 lb. It features a convertible mounting post that supports sleds that accept 13, 19, or 22mm posts, allowing you to use the vest and arm with FLYCAM and third-party stabilizing sleds. The system features both a small and large extension arm to allow the operator to select how close to their body the sled rides.
The vest by itself supports up to 39.7 lb, so between the included arm and your camera, it can easily support the weight of your sled and camera. The vest fits both men and women, and it adjusts to fit waist sizes from 28 to 60", with 6" of vertical adjustment. Hook-and-loop and snap buckles make it easy to get in and out of, as well as adjust the size to fit. The spring arm supports loads up to 11 lb, and the tension is easily adjustable by a built-in knob so you can fine-tune the arm's tension to match the needs of the shot.
The arm can attach to the vest for either right- or left-handed operation
The support post is reversible from 13 to 19mm, and an included bushing converts that to 22mm for use with FLYCAM or third-party sleds
Material | Aluminum |
---|
Please Login to Add Review