Use this Double Cold Shoe Mount Bar from Vanguard to mount two accessories with cold shoe mount bases to your camera's hot shoe mount, and extend the width up to 8.2". If your accessory base needs a 1/4" thread, you can use the VEO CSM or VEO CSM DLX to attach it. To attach to your camera, simply slot into the hot shoe mount and tighten the lower disc with the included Allen key for a solid grip. To attach your accessory, simply slide it into the cold shoe mount and tighten the locking knob on the VEO CSMM2. You can adjust the width of the cold shoe mount bar by up to 5.3" for optimal position or balance. Lift the flip lock to release the plate, adjust the position, and flip the lock back down to secure it. At each end of the bar is a small protruding button that keeps the cold shoe mounts attached. On the front of each cold shoe mount is a 1/4" thread so you can attach a suitable support arm. The base of the bar also has a 1/4" thread, so it can be attached to a support arm rather than your camera hot shoe mount.
Attaches to camera hot shoe mount
1/4" thread on base
Bottom rotating wheel ensures a tight grip
Extends to 8.2" wide
1/4" thread hole on the front of each cold shoe mount for a tripod support arm
Attach two accessories with cold shoe mount bases, such as VEO CSM or VEO CSM DLX, to the top plate
The mount features two accessory 1/4" thread attachment points, two accessory cold shoe mount attachment points, and four accessory attachment points
Please Login to Add Review
| GTIN | - |
|---|