Capture smooth, dynamic sweeping pans and camera rises with the professional Kite-22 Wonder Package from Proaim. The heavy-duty aluminum jib features a telescoping arm design and is made up of seven sections, each measuring 4' in length and able to be overlapped by up to 1' for varied lengths. The kit includes a heavy-duty tripod stand with 150mm bowl, a mid-level spreader, a D-33 Pro dolly, the Gold two-axis Pan/Tilt head with joystick controller, a power pack, a LANC zoom controller, storage cases, and a tool pouch.
The arm extends to 24.5' maximum length, supports loads up to 45 lb, and can support counterweights using the rod on the back of the jib arm. It features a mounting arm to mount the joystick controller for controlling the pan/tilt head. The pan/tilt head supports a camera rig up to 16.5 lb and has 360° rotation on both axes. The tripod stand mounts on the dolly, and the dolly can support the entire rig weighing up to 1763 lb. A carry case set is included to store and transport the jib, tripod stand, and all its parts, and the tool set assists in assembling the rig.
Proaim Gold Pan/Tilt Head with 12V Joystick Control Box
The Proaim Gold Pan/Tilt Head with 12V Joystick Control Box Is a motorized pan/tilt remote head for jibs and cranes. It can safely handle camera packages weighing up to 16.5 pounds, is capable of panning throughout 360°, and depending on camera configuration, it can also move 360° through the tilt axis.
The head has variable pan and tilt speeds, with a minimum speed of 6° per second for slow and languid pans and tilts. When more alacrity is necessary, the head has a maximum pan/tilt speed of 51° per second. Included with the head are the joystick controller, a short 4-pin XLR power cable for working from batteries, a 12V power supply, and a worldwide AC power converter. The included control cable is 49' long, allowing you to work on a wide variety of jibs and cranes.
Proaim Power Pack
The Proaim Power Pack is a high-capacity power bank for powering 12V devices, such as tilt heads and sliders on set or at events. In a compact 13 x 10" Pelican case, the Power Pack provides two 4-pin XLR 12V power ports that can be used simultaneously. After 12 hours of charging over an integrated 2-prong power cord, the Power Pack will supply approximately five hours of power when working with a single device. An LED indicator on the outside lights up green when the Power Pack is fully charged, red when a low discharge level is reached, and yellow if there are any technical issues. When not in use, the 2-prong power cord can be retracted into the case.
Other Features
12V, 7Ah memory-free battery
100 to 240 VAC input voltage
Crushproof, dustproof, and water resistant (not waterproof)
Easy-open latch
No need to discharge completely before recharging
Proaim LANC Zoom Controller for Sony/Canon/Panasonic Cameras
Control zoom and start/stop via LANC on your Sony, Canon, or Panasonic camera with this LANC Zoom Controller from Proaim. The controller features a start/stop button, a zoom rocker, a camera-type switch, and a 2.5mm LANC jack on the front and one on the side, offering different location options. Included with the controller are two LANC cables measuring 3.3 and 30' in length.
The compact controller features a start/stop button right on the face and a pressure-sensitive zoom rocker. On the side, a switch allows you to control either Sony, Canon, or Panasonic cameras. The built-in clamp will fit on nearly any tripod pan bar, camera support, or stabilizer arm with a diameter that ranges from 0.4 to 1.2".
Compatibility
Most Sony, Canon, and Panasonic cameras with 2.5mm LANC control
| Material | High-Grade Aluminum |
|---|
Please Login to Add Review
| GTIN | - |
|---|